Under the sea wall mural sailing through waves
Reference: F9975Experience the serene beauty of sailing as the boat glides over turquoise waters. The expansive sky features soft clouds, creating a tranquil atmosphere of the sea. This design captures the essence of adventure and exploration on the water.
Immerse yourself in a stunning visual experience with our Under the sea wall mural sailing through waves. This breathtaking design features a beautiful boat gliding gracefully over the waves, surrounded by an expansive ocean view. The vibrant colors of the water, the serene sky, and fluffy clouds create a tranquil atmosphere that brings the beauty of sailing right into your space.
Why this product should be used for decoration
Transform your living space with the Under the sea wall mural sailing through waves. This enchanting mural not only captivates the eye but also inspires a sense of adventure and peace. Whether you want to create a calming environment in your bedroom or a lively atmosphere in your living room, this under the sea wall mural is the perfect choice. Let the waves of creativity wash over your home!
How to apply this product
Applying the Under the sea wall mural sailing through waves is a simple and enjoyable process. Using glue, a roller, a brush, and a cutter, you can easily transform your wall into a magnificent sea view. Just follow the instructions for a seamless installation!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.