Wall mural vehicle classic car adventure
Reference: F9253A classic car is depicted against a textured brick background featuring Route 66 signage. The design captures elements of vintage Americana, highlighting the iconic road trip experience along the historic highway, evoking nostalgia for travel and adventure.
Transform your space with our stunning Wall mural vehicle classic car adventure! This captivating design features a vibrant brick wall backdrop, an iconic badge, a classic automobile, and the adventurous spirit of Route 66. Each element beautifully combines to create a unique visual experience that transports you to the open road, evoking a sense of nostalgia and excitement.
Why this product should be used for decoration
The Wall mural vehicle classic car adventure wall mural vehicle is not just a decoration; it's a journey into the past! This mural will inspire conversations and awaken memories of classic road trips, making it the perfect addition to any room. Imagine stepping into a space where every glance evokes the thrill of adventure and the charm of vintage cars.
How to apply this product
Applying the Wall mural vehicle classic car adventure wall mural vehicle is simple and rewarding! Use glue and a few essential tools like a roller, brush, and cutter to transform your wall into a stunning focal point. Just a few easy steps and your wall will be the envy of all!
Manufactured in matt colours, this non-woven wallpaper is designed for durability and easy maintenance. It can be effortlessly cleaned with a damp cloth and a bit of neutral soap, ensuring it stays fresh and vibrant for years to come. With a grammage of 180 grams per square metre and a lifespan of 10-15 years, this mural is built to last. Plus, it can be easily removed by wetting it with a sprayer when it's time for a change. Produced and shipped in rolls 50 centimetres wide, it also meets M2 reaction to fire certification, ensuring both safety and style.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.