Beige colour with white dots Nursery wallpaper
Reference: P6129The beige colour with white dots nursery wallpaper features a delightful and charming design that will bring a touch of elegance to any baby's nursery. The soft, muted beige tones combined with the classic white polka dots create a soothing and calming atmosphere, perfect for creating a peaceful and serene space for your little one. The pattern is subtle yet eye-catching, adding visual interest to the walls without being overwhelming.
why this product should be use for the decoration
Beige colour with white dots Baby's nursery wallpaper is the ideal choice for creating a warm and inviting environment for your little one. The soft, neutral tones and timeless polka dot pattern add a touch of whimsy and charm to the nursery, creating a space that is both cozy and stylish. Transform the nursery into a magical and enchanting space that your baby will love!
how to apply this product
Applying Beige colour with white dots nursery room wallpaper is a breeze. Simply use glue to adhere the non-woven wallpaper to the wall, using a roller and brush to smooth out any air bubbles. A paintbrush and cutter will help you achieve a precise fit. Cleaning is easy with a damp cloth and neutral soap, and with a durability of 10-15 years, this wallpaper will stand the test of time. When it's time for a change, simply wet the wallpaper with a sprayer to easily remove it.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.