Brickwork Simulation bricks wallpaper
Reference: P8647An elegant interior featuring a realistic brick pattern that adds texture and a sense of urban charm to the space. The design mimics traditional brickwork, providing a contemporary twist suitable for various settings.
The Brickwork Simulation bricks wallpaper design features a stunningly realistic brick texture in various shades of grey. The faux stone-effect pattern adds depth and character, making it the perfect choice for interior decoration. This non-woven wallpaper is manufactured in matt colours, with a durability of 10-15 years, and can be easily removed by wetting the product with a sprayer. It has a grammage of 180 grams per square metre and is produced and shipped in rolls 50 centimetres wide. The material can be cleaned with a damp cloth and a little neutral soap, making it a practical choice for any space. Applying it is easy with glue, a roller, brush, and cutter. With its M2 reaction to fire certification, this wallpaper is both stylish and safe.
Why this product should be used for decoration
The Brickwork Simulation bricks wallpaper is the perfect choice for adding a touch of rustic charm to any room. Its lifelike stone-effect pattern and durable, high-quality material make it a standout option for interior decoration. With its easy application and long-lasting design, this wallpaper is a must-have for anyone looking to create a stylish and inviting space!
How to apply this product
Applying the Brickwork Simulation bricks wallpaper is a simple and straightforward process. Using glue, a roller, brush, and cutter, you can easily transform any space with this stunning wallpaper. Whether you're a seasoned DIY enthusiast or a first-time decorator, this wallpaper is a perfect choice for adding character and style to your home.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.