Rustic wallpaper dark wood vinyl piece
Reference: P14320Transform your space with our Rustic wallpaper dark wood vinyl piece, designed to evoke the charm of natural wood while providing the durability of vinyl. This stunning design features rich, dark wood tones that create a cozy and inviting atmosphere in any room. The Rustic wallpaper dark wood vinyl piece is crafted with a matte finish, making it perfect for adding a touch of elegance to your walls without overwhelming your decor.
Why this product should be used for decoration
The Rustic wallpaper dark wood vinyl piece rustic wallpaper is an exceptional choice for those looking to elevate their home decor. Its warm, inviting tones and natural wood appearance create a serene environment that inspires relaxation and comfort. Imagine walking into a room adorned with this beautiful wallpaper; it instantly brings a sense of nature indoors, making it perfect for living rooms, bedrooms, or any space where you want to foster a welcoming ambiance. Let your walls tell a story of rustic charm!
How to apply this product
Applying the Rustic wallpaper dark wood vinyl piece rustic wallpaper is a breeze! Simply use glue, a roller, a brush, and a cutter for a smooth installation. This non-woven material allows for easy handling and can be effortlessly cleaned with a damp cloth and a bit of neutral soap. Enjoy the transformation of your space with minimal effort!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.