Stone Slab Pattern stone effect wallpaper
Reference: P6825The image displays a textured pattern reminiscent of stacked stone slabs. This design imparts a natural and architectural feel, suitable for enhancing an interior space with a sense of solidity and earthiness.
The Stone Slab Pattern stone effect wallpaper features a stunning design that mimics the natural texture and pattern of stacked stones, perfect for adding a touch of architectural charm to any interior space. The matt colors and non-woven material give it a high-quality finish, while the 180 grams per square meter grammage ensures durability for 10-15 years. Applying the wallpaper is easy with just glue, a roller, brush, and cutter, and it can be easily cleaned with a damp cloth and neutral soap. In addition, it has an M2 reaction to fire certification, making it a safe choice for any room. When it's time for a change, simply wet the wallpaper with a sprayer for quick and easy removal. This exquisite wallpaper is shipped in rolls 50 centimeters wide, making it a breeze to install and create a stunning feature wall!
Why this product should be used for decoration
The Stone Slab Pattern stone effect wallpaper is the perfect choice for adding a touch of natural beauty and texture to any room. Its realistic stone design brings a sense of warmth and character to the space, creating a truly unique and eye-catching feature. Whether you're looking to create a cozy atmosphere in a living room or a rustic feel in a kitchen, this wallpaper is sure to make a statement and elevate your interior design!
How to apply this product
Applying the Stone Slab Pattern stone effect wallpaper is a simple and straightforward process. Start by preparing the wall surface and cutting the wallpaper to the desired length. Apply the glue evenly to the wall or the back of the wallpaper, then carefully position the paper, smoothing out any air bubbles with a roller. Trim any excess paper with a cutter for a perfect fit. The result is a stunning stone effect that will transform your space!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.