Striped Wood Pattern wood effect wallpaper
Reference: P8154The image displays a textured striped wood pattern with vertical planks. Each plank shows natural wood grain details, offering a sense of rustic charm and simplicity.
The Striped Wood Pattern wood effect wallpaper is a stunning addition to any interior space, featuring a realistic wood plank design with a textured finish. The vertical lines and natural wood tones create a warm and inviting atmosphere, making it an ideal choice for decoration. Transform your living room, bedroom, or office with this stylish wallpaper that brings the beauty of nature indoors!
Why this product should be used for decoration
The Striped Wood Pattern wood effect wallpaper is the perfect choice for adding a touch of rustic charm to your home. With its realistic wood grain and vertical stripes, it creates a cozy and welcoming ambiance. Elevate your interior design with this unique wallpaper that exudes warmth and character, making it a must-have for any decor enthusiast!
How to apply this product
Applying the Striped Wood Pattern wood effect wallpaper is a breeze. Simply use glue to adhere it to the wall, and use a roller, brush, and cutter for a seamless application. The durable non-woven material ensures easy cleaning with a damp cloth and neutral soap, while its long-lasting quality and easy removal make it a practical choice for any space.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.