Wood effect wallpaper natural sanded oak vertical
Reference: P13317Transform your space with our stunning Wood effect wallpaper natural sanded oak vertical, which beautifully mimics the elegance of natural wood. This design features a warm, inviting tone that captures the rustic charm of sanded oak, offering a serene backdrop for any room. The matte finish enhances its authenticity, making it a perfect choice for those seeking a touch of nature in their interiors!
Why this product should be used for decoration
The Wood effect wallpaper natural sanded oak vertical wood effect wallpaper is an exceptional choice for decoration due to its ability to create a cozy and inviting atmosphere. Imagine walking into a room adorned with this wallpaper, where the soothing tones of natural oak wrap you in warmth and comfort. It effortlessly complements various design styles, from modern minimalism to classic elegance, inspiring creativity in every corner of your home!
How to apply this product
Applying the Wood effect wallpaper natural sanded oak vertical wood effect wallpaper is simple and rewarding! Use glue to adhere it to the wall, and with the right tools—a roller, brush, and cutter—you'll have it up in no time. Enjoy the transformation as your space evolves into a warm haven!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.